Product Description

MERCEDES BENZ BONNET BADGE EMBLEM SPRING MOUNTED W140

DESCRIPTION

This emblem is straightforward to fit. Please check these measurements against your bonnet ring to make sure it is the correct size. If you are unable to fit it any body shop will be able to fit it for a small charge.



• Bonnet badge/Emblem with Coil Spring Under emblem this one has blue writing on the ring ( Mercedes Benz) as per picture.
• The Emblem is 100mm high and 77 mm wide this standard size .
• The spring that sits under your bonnet is 35mm in depth and 40mm wide including the wings The Diameter of the base that sits on the bonnet is approximately is 49mm.
• The badge has 2 metal wings and a coil under the badge that when pushed through the hole in your bonnet will pull tight against the bonnet to ensure it doesnt fall off.
• This is a high quality replacement part .Please make sure that you measure the fitting first before you purchase this fitting is standard in size.
• Its is very simple to install tools required are pliers.
• If you are not happy fitting yourself please ask your local garage.
• Open the bonnet, with the pliers turn the Star base counterclockwise (Left) this will remove the old star.
• Then slot the new Star in it's place and with pliers turn the Star Clockwise (Right).

HERE ARE SOME EXAMPLE OF APPLICATION OF THIS BADGE. IF YOUR CAR IS W140 IT WILL FIT.

 

 

 

Body style	Chassis code	(Cal.) Years	Model
sedan	W140.135/W140.134	1996–1998	S 300
		1991–1996	300 SD / S 350
	W140.028	1993–1998	300 SE 2.8 / S 280
	W140.032	1991–1993	300 SE
		1991–1993	300 SEL
		1993–1999	S 320
	W140.042	1991–1993	400 SE
	W140.043	1991–1993	400 SEL
		1993–1998	S 420
	W140.051	1991–1993	500 SEL
		1993–1999	S 500
	W140.057	1992–1993	600 SEL
		1993–1999	S 600
coupe	W140.063	1994–1998	S 420 / CL 420
	W140.070	1992–1993	500 SEC
		1993–1999	S 500 / CL 500
	W140.076	1992–1993	600 SEC

Quality Automotive Parts