Product Description

Remote Key with chip for Toyota Transponder Tarago Avensis RAV4 Corolla transmitter

CHEAPEST ONLINE FOR LIMITED TIME ONLY 

 

PAY $4.99 AND RECEIVE THIS ITEM WITHIN 12-72 BUSINESS HOURS

 

PICTURE IS ILLUSTRATION ONLY 

 

BRAND NEW 

 

MADE BY TOP MANUFACTURE 

 

HIGH QUALITY 

 

1 YEAR WARRANTY 

 

QUALITY GUARANTEE 

 

 

ANY INQURIES CALL 0430001243

 

THIS AD IS FOR 1 x  2 button COMPLETE KEY  AS IN PICTURE

 

 

Compatible Part Number: 

60030 and 60040 - 304mhz , 4c chip

please check the part number before purchase,which should be on the chip board inside the case or the cover back and no letter "G" wrriten on blade

 

 

fits the following car:

 RAV4 ACA2:   05/2000--07/2003

Tarago ACR30:  02/2000--10/2003

Avensis Verso:  05/2001--08/2003 

Corolla ZZE122: 10/2001--02/2007

LandCrusier 100 series 08/1998 to 08/2002

 

Remote part programming

STEP1.       Open Driver side door

 

STEP 2.       Put the Original key in and out of ignition for 2 times

 

STEP 3.       Close and open driver door for 2 times

 

STEP 4.       Original Key in and out for once

 

STEP 5.       Shut and open door for twice

 

STEP 6.       Close door

 

STEP 7.       Put Original Key in the ignition and Turn ignition on

 

STEP 8.       Turn ignition off and remove key

 

STEP 9.       Door locks will cycle

 

STEP 10.   Do the following for all remotes:

 

Press lock and unlock together for 1s, then press the lock button

 

STEP 11.   Locks will cycle put key in ignition turn to on then off

 

STEP 12.   Remove key from ignition, close door and test remote

 

 

 

To Delete All Remotes from the Vehicle

 

 At Step 7, turn the key on and off for 5 times then remove key, door locks will cycle for 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.

 

 

 

Program keys

 

STEP 1.       Put Original master key in and out of ignition for 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in)

 

STEP 2.       Open and shut door for 6 times

 

STEP 3.       Remove original key and insert the new key (Do not turn the key, just insert it into the ignition

 

STEP 4.       Leave for 60s (or til light goes out)

 

STEP 5.       After 60s security light stops flashing then you can start car.

 

STEP 6.       Take key out

 

STEP 7.       Open and shut door

 

If you make a mistake at any point in the procedure, use original key to start the car. Take the key out, open and close door. Now you are ready to start again.